Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Melbourne?
Garage Door Installation services in Melbourne typically cost $700 to $2,200 for a new single door, and most projects land somewhere between $1,000 and $1,600. That figure covers the door, tracks, springs, hardware, and the professional install. Adding a new opener system runs the total $250 to $550 higher. We offer free estimates, so you’ll know your exact number before any work starts.
Key Takeaways
- Standard single-door installation in Melbourne: $700 – $2,200.
- Double doors, custom sizes, and premium materials push toward the top of that range.
- A new opener adds $250 – $550 for installation; changing the door on an existing opener can run $120 – $320 for opener repair.
- Straight pricing comes from a straight diagnosis. We check your existing system first, because sometimes a repair beats a replacement.
Garage Door Installation Cost Breakdown (2026)
Here’s how the dollars break down for a new door in the Melbourne market. These ranges are what homeowners actually pay once the door type, size, and labor are added together.
| Line Item | Typical Cost Range |
|---|---|
| New single-door installation (standard) | $700 – $1,500 |
| New double-door installation | $1,400 – $2,200 |
| Opener installation (new or upgrade) | $250 – $550 |
| Panel replacement (if reusing frame and hardware) | $250 – $500 |
| Track realignment during install or after | $120 – $240 |
| Roller replacement | $110 – $220 |
That table is a starting point, not a locked quote. The single biggest cost driver is the door itself: a basic steel door sits at the bottom of the range, while insulated, carriage-style, or custom-sized doors climb toward the top. Double-car doors use more material and larger springs, so they cost more than a single door even on a straightforward job. Opener choice matters too. If you’re upgrading to a belt-drive or smart opener system, that’s a separate line. We work on the leading opener brands, so whether your new door pairs with a LiftMaster, a Chamberlain, or a Genie, we can install and program the whole system in one visit.
One thing a lot of pricing pages skip: the door and the opener are two different mechanical systems, and each can fail independently. When a homeowner in Melbourne calls for a new door, we look at both. If the existing opener has years left on it and just needs a tune, we’ll tell you. Repair first, always. A new door doesn’t need a new opener if the old one is healthy.
What Affects Garage Door Installation Pricing in Melbourne
No two installs are identical. Here are the factors that move the number up or down on a Melbourne job.
- Door size and style. A standard single door is the cheapest path. Double doors, oversized openings, and carriage-house or custom designs require more material and framing, so they land near $1,500 to $2,200.
- Material. Steel is common and affordable. Insulated steel, aluminum, wood-look, and premium composite doors climb from there. Insulation is worth it if the garage shares a wall with living space or you use it as a workshop.
- Opener type. A basic chain-drive opener costs less than a quiet belt-drive or a smart opener with app control. Installation itself runs $250 – $550 depending on the unit and wiring.
- Whether we swap out the opener too. Replacing just the door on a working opener is cheaper than a full door-plus-opener install. We diagnose first so you’re not paying for hardware you don’t need.
- Old door removal and disposal. Older doors can be heavy and awkward, especially if they’re wood or have a failing spring. We factor removal and haul-away into the quote.
- Track and frame condition. If your tracks are bent or the frame is out of square, we may need track realignment ($120 – $240) before the new door hangs true.
We work across eight major door and opener brands, including Clopay, Amarr, Wayne Dalton, and Raynor for doors and LiftMaster, Chamberlain, Genie, and Craftsman for openers. That brand coverage matters on a new install. If you’ve picked out a door you like at a home center, or your current opener is a particular model, we recognize the system in front of us and can build the install around it instead of guessing compatibility.
Repair or Replace? A Straight Answer
This is the question that decides your project, so we answer it honestly. A single broken spring or a worn roller isn’t a reason to replace a door. Spring repair runs $180 – $340, cable repair $130 – $250, and roller replacement $110 – $220. On a door with sound panels, that’s a repair, not a replacement, and it’s the cheaper call.
Replacement starts to make sense when the door itself is failing, not just its parts. Punctured or dented panels that can’t be matched, a wood door with rot, a door that’s out of square, or a system where several components are wearing out at once. Even then, panel replacement at $250 – $500 can stretch your current door’s life if the frame and hardware are solid. We start every job with diagnosis because a new door is a bigger purchase than you should make until you know the old one is truly done.
How to Save on Garage Door Installation
Installation isn’t the place to chase the lowest bid, but there are real ways to keep the cost down without cutting corners on a system that holds a heavy door over your head.
- Get a diagnosis before you commit. Call (866) 472-4163 and we’ll tell you whether your existing door can be repaired ($150 – $600 typical repair range) instead of replaced. Sometimes the honest answer saves you a grand.
- Keep a working opener. If your current opener is healthy, reusing it avoids the $250 – $550 opener install cost. We’ll tell you its condition up front.
- Stay with a standard size and style. Standard single doors sit at the bottom of the $700 – $2,200 range. Custom sizing is where the price climbs.
- Replace worn hardware during the install. If you’re already installing, roller replacement ($110 – $220) and track realignment ($120 – $240) are cheaper bundled than called back for later.
- Ask for a free estimate in writing. A clear line-item quote for a Garage Door Installation in Melbourne project means no surprise add-ons after the door’s off the truck.
Estimates are free, and we won’t push a replacement when a repair does the job. That’s the whole point of a repair-first philosophy: honest diagnosis first, then the option that fits your door’s actual condition.
What’s Included in a Professional Install
- Removal and haul-away of the old door and hardware
- New tracks, springs, hinges, rollers, and all hardware sized for the door
- Door balancing and opener force-setting so the safety reverse works right
- Opener install or reconnection, including remote programming for the major brands
- A walk-through so you know what was replaced and how it should sound and feel
If the job involves a new opener, we program it to the door and set the travel limits, so a Genie, LiftMaster, or Chamberlain stops where it should and reverses on contact. That last step is why we don’t hand off a door install to a general handyman: the door and the opener have to be tuned together, and that’s the trade we built the company around.
Why Brand Experience Lowers Your Bill
We’ve built Ironstone around the door and opener brands that actually show up in Melbourne garages. When a technician knows a LiftMaster logic board or a Genie safety sensor from experience, the job moves faster and the diagnosis is accurate the first time. That saves you money on labor and stops the trial-and-error guessing that runs up a bill.
We specialize in one trade: garage doors. We don’t do gutters, we don’t do general handyman work, and we don’t run a big-box install crew. Every technician, every tool, and every process is set up for this single category. Eight major brands under one roof, and a team that covers both the door and the opener, means you’re not calling two companies for one problem. From a broken spring (home) to a full door upgrade, it’s the same specialist finishing the job.
If the cost of a repair is weighing on you, here’s the range to expect before you call: spring repair $180 – $340, cable repair $130 – $250, opener repair $120 – $320, and general garage door repair $150 – $600. Those numbers don’t require you to replace a door that’s still sound. We start every visit with that repair-first question and only recommend a new install when the door genuinely needs one. A worn roller has no business pricing you out of the door you already own.
FAQs – Garage Door Installation Cost
How much does a new garage door cost in Melbourne?
A new garage door in Melbourne runs $700 to $2,200 installed, with most single-door projects in the $1,000 to $1,600 range. Double doors, custom sizes, and premium materials sit near the top. Call (866) 472-4163 for a free written estimate for your door size.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door structure is sound. A spring repair ($180 – $340) or cable repair ($130 – $250) costs far less than a $700 – $2,200 replacement. Replacement makes sense only when the panels or frame are failing. Call (866) 472-4163 and we’ll diagnose which one you need before you spend.
Does the price include the new opener?
Opener installation is a separate cost of $250 to $550 on top of the door. If your existing opener is healthy, we can reuse it and skip that line. Opener repair on an existing unit runs $120 – $320. Call (866) 472-4163 and we’ll tell you which applies to your system.
Can you come out today for an estimate?
Availability varies, but we schedule estimates promptly. Free estimates mean you can get your number without committing. Call (866) 472-4163 to find the next open slot for your Melbourne address.
Which brands do you install and work on?
We work on eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If your door or opener is one of these, we install, tune, and repair it. Call (866) 472-4163 and mention your model to get the most accurate estimate.
What makes up the cost of a garage door install?
The door is the biggest piece, but the quote also covers removal, new tracks, springs, rollers, hardware, balancing, and labor. Track realignment ($120 – $240) and roller replacement ($110 – $220) are factored in when your frame or hardware needs it. Call (866) 472-4163 for a line-item breakdown on your specific opening.
Get a Straight Number for Your Melbourne Door
A pricing page only helps if you can act on it. If you’re ready to replace a failing door or want to know whether a repair will do, call us at (866) 472-4163 for a free estimate. We’ll look at the door and the opener, tell you what’s actually wrong, and give you a clear number for the Melbourne job. No upsell, no guesswork, just the honest call on repair or replace.
Pricing reflects the Melbourne market as of 2026. Ironstone Garage Door Repair offers free estimates – call (866) 472-4163.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
— Tamika Ellison"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
— Arjun Gupta"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Travis Reed